Oak Cheshire Pattern Baserail available with either:

41mm groove for 41mm spindles

32mm groove for 32mm spindles

Available in the following lengths:

• 1200mm
• 2100mm
• 3000mm
• 4200mm

All of our rails come wrapped along with the appropriate size infill (32mm or 41mm wide depending on your spindle / groove size). Infill is supplied in lengths of approximately 1m, these can be cut to suit your spindle spacing on site.

Usage

Our baserail can either be used on the top of your staircase as a string capping, or along flat landing areas. Baserail is usually screwed down through the spindle groove using ordinary wood screws which become covered by the spindles / infill.

Baserails can be used between 2 newel posts, or they can be cut at 45 degrees to form a 90 degree mitre for example to return a landing balustrade the same way as you would mitre a handrail.

Our oak rails look great with oak newel posts and oak spindles.

Finish

Our oak stair parts come pre-sanded, unfinished. They can be finished by painting, waxing or varnishing.